DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126 Issue 4
June 1999
Maintenance Commands
8-184reset port-network
8
Parameters
Examples
reset port-network 10 level 2
Output
For more information, see ‘‘Common Output Fields’’ and ‘‘Common Ab ort and Fail
Codes’’ at the beginning of thi s chapter. The following d isplay shows a typica l
result when reset port-network 4 lev 1 is entered.
PN# Port network number
Use list cabinet to find the PN number(s) associa ted with a given
cabinet.
level 1 | 2 Reset level 1 (WARM restart) is used to restart an EPN that is still fully or
partially in service. All stab le calls are preserved , and full service is
restored within 35 seconds.
Reset level 2 (COLD restart) results in reset, removal, and reinsertion of
all EPN circuit packs. It is used to recover an EPN that has been taken
out of service. Level 2 restarts should take less than 2 minutes. All calls
and applic ation links with an endpoint in the EPN are drop ped. If two
level 2 resets within an hour fail to return the EPN to service, EPN
Emergency Transfer is invoked. (EPN Emergency Transfer will alread y
be in effect if the link to the EPN has been d own for more than 1
minute).
Port The PN number of the reset EPN.
reset port-network 4 level 1
TEST RESULTS
Port Maintenance Name Alt. Name Test No. Result Error Code
04 EXP-PN 956 PASS
Command Successfully Completed