DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126 Issue 4
June 1999
Maintenance Object Repair Procedures

9-1012MAPD-BD (MAPD Interface Circuit Pack TN802)

9
Notes:
a. Error Type 1: indicates that the circuit pack has totally stopped func tioning or is not fully administered. The alarm is logg ed about 15 minutes after the circuit pack has been removed or 11 minutes after the SAKI Test (#53) fails.To be fully administered, a MAPD circuit pac k must meet all of these conditions:
2306 Any Y el low Alarm Inquiry T est
(#141) MIN/
WRN3OFF test Board UUCSS
2561 Any Major Alarm Inquiry Test
(#142) MIN/
WRN3OFF test b oard UUCSS
2817 Minor Alarm Inquiry Test
(#143) MIN/
WRN3OFF test b oard UUCSS
3073 to
3160
(m)
Any Slip Alarm Inquiry Test
(#144) MIN/
WRN3OFF test board UUCSS r 6
3330 (n) 46083 MIN/
WRN3ON
3585 to
3601 (o) Any Misframe Alarm Inquiry
Test (#145) MIN/
WRN3OFF test board UUCSS r 6
3840 (p) Any None
3841 (q) 4358
3842 (r) 46097
3843 (s) 46081
3999 (t) Any None
1. Run the Short Test Sequence first. If all tests pass, run the Long Test Sequence. Refer to the
appropriate test description and follow the recommend ed procedures.
2. If ports are assigned to the circuit pack, then a minor alarm is raised. If no ports are assigned to
the circuit pack, then a warning alarm is raised. The alarm is raised after the circuit p ack has been
missing for a period of 15 minutes. Warning alarms are also raised against any ports ad ministered
on the circuit pack.
3. Minor alarms on this MO may be downgraded to war ning alarms based on values set in the set
options command.
4. Major alarms on this MO may be downgraded to minor or warning alarms based on values set in
the set options command.
Table 9-390. MAPD (TN802) Error Log entries — Continued
Error
Type Aux
Data Associated Test Alarm
Level On/Off
Board Test to Clear Value
Continued on next page