DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126 Issue 4
June 1999
Maintenance Object Repair Procedures
9-1911VC-BD
9
Reset the circuit pack b y executing the busyout board UUCSS, reset
board UUCSS, and release board UUCSS command s. When it is reset,
the circuit pac k executes a set of tests to detec t the presence of any of the
above faults. The detection of one these errors d uring initialization causes
the circuit pac k to lock-up and ap pear insane to the system. See the repair
procedures in footnote (a) for error typ e 1.
e. The circuit pack d etects a program log ic error. While no action is required,
this error may lead to errors of other types being reported against thi s
circuit pack.
f. The circuit pack can not update NPE memory and read it bac k. This error
type can be ig nored, but it may lead to other error typ es being reported
against this circuit p ack.
g. A critical hardware fai lure has been detected on the circuit pack. Us e
busyout board UUCSS, reset board UUCSS, followed by release board
UUCSS. If test #53 passes, the on-board circuitry is healthy. Use test
board UUCSS long clear to retire the alarm. If test #53 fails, replace the
circuit pack.
h. The circuit pack d etected a critical hardware failure. Reset the circuit pack
by issuing the busyout board UUCSS, reset board UUCSS, and release
board UUCSS commands. If the Circuit Pack Restart Test (#594) passes,
then the on-board circu itry is healthy. Retire the alarm by issuing the test
board UUCSS long clear command. If the Circuit Pack Restart Rest
(#594) fails, replace the circ uit pack.
The reported error types corresp ond to the following detec ted errors:
i. The circuit pack is hyp eractive — it is flooding the switch with messages
sent over the control channel. The circuit p ack is taken out of service when
a threshold number of these errors is repor ted to the switch. Clear the
alarm by using busyout board UUCSS, re set board UUCSS, test board
UUCSS long clear, and release board UUCSS. If the error recurs within
10 minutes, then replace the circ uit pack.
Error Description
1293 On-board auxiliary processor insane
1294 Internal memory access error