DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126 Issue 4
June 1999
Maintenance Commands
8-308status switch-node
8
status switch-node
status switch-node SN# [print]
This command displays the operational status and attrib utes of the user
specified switc h node. The operational status of the ac tive and standb y switch
node Clock(SNC) circuit p acks for the switch nod e are displayed along with any
alarms logged ag ainst the specified switch node.
Parameters
Output
A line of information is displayed for each switch nod e carrier.
SN number Normally switch node 1 is located in the PPN cabinet, and switch node
2, if present, is located in t he nearest EPN cabinet. The switch node
number defaults to 1.
Switch Node The switch node number, 1 or 2. If the PNC is d uplicated, the A and B
PNCs are each reported separatel y.
Location The physical position of the switch node carrier represented as "UUc".
Where "UU" represents the cabinet number and "c" represents the
carrier. The simplex PNC configuration wil l display only one switch
node location, while the d uplex PNC configuration will d isplay the
active and standby switch node locations.
status station 1002
GENERAL STATUS
Type: 7405D Service State: in-service/on-hook
Extension: 1002 Maintenance Busy? no
Port: 01C0702 SAC Activated? no
Call Parked? no User Cntrl Restr: none
Ring Cut Off Act? no Group Cntrl Restr: none
CF Destination Ext:
Message Waiting:
Connected Ports:
ACD STATUS HOSPITALITY STATUS
Agent Logged In Work Mode AWU Call At:
DND: not activated
Room Status: non-guest room
On ACD Call? no