DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126 Issue 4
June 1999
Maintenance Commands
8-120format card-mem
8
Defaults
No defaults.
Parameters
Help Messages
If the system technician presses hel p after entering
displaymemory-configuration the following message will be displayed:
Error Messages
If the format memory [translation] [ announcements] [ coredump] maintenance
command is executed and errors occur, one of the following error messages will
be displayed:
— flash card to small for operation requested
— card is bad (reformat failed)
— card is write protected
— command cannot be executed due to command contention
— NETCON 12V programming power failure
Output
For the following output example the c ommand format card-mem was entered.
print This parameter causes the information d isplayed by this c ommand to
be sent to the printer attached to the terminal as well as to the screen.
schedule When the “schedule” option is specified , the command is validated and
then a scheduling form is d isplayed to allow the tec hnician to schedule
execution of the command. The c ommand is then placed in the
command queue and is executed at the sp ecified time. The information
displayed b y the command is sent to the system p rinter instead of the
screen. Refer to the Report Scheduler and System Printer feature
specification [ 1] for more details.