DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126 Issue 4
June 1999
Maintenance Object Repair Procedures
9-383CARR-POW (Carrier Power Supply)
9
Table 9-160. TEST #126 OLS Recycle Test
Error
Code Test
Result Description/ Recommendation
1000 ABORT System resources required for this test are not available.
1. Retry the command at 1-minute intervals for a maximum of 5 times.
1366 ABORT Indicates that the active Tone/Clock for the EPN is in requested carrier.
1. If duplicated Tone/Clock boards exist, issue the set tone-clock
command to switch Tone/Clocks, otherwise the power cannot be
cycled.
2. If the switch succeeds, rerun the test.
1367 ABORT Indicates that the active Expansion Interface link for the EPN is in requested
carrier.
1. If duplicated EIs exist, issue the reset pnc interchange command to
switch EIs, otherwise the power cannot be cycled.
2. If the switch succeeds, rerun the test.
2000 ABORT Response to the test request was not received within the allowable time
period.
1. Retry the command at 1-minute intervals for a maximum of 5 times.
2029
2319
2320
2500
ABORT Internal system error
1. Retry the command at 1-minute intervals for a maximum of 5 times.
FAIL There is a problem with one or both OLSs on the cycled carrier.
1. Since the OLS Recycle Test failed, both OLSs in the cycled carrier
should have been powered off by the system software. Both OLSs
should be showing a red status LED, instead of a yellow one. Since the
OLS Query Test is a subset of the OLS Recycle Test, the OLS Query Test
(#127) should also fail. Run the OLS Query Test by using the test
environment UU command where UU is the appropriate cabinet
number.
2. If test #127 fails, follow the repair procedures described for Test #127.
PASS Both OLSs in the recycled carrier were found to be healthy b y the SYSAM in
a PPN or the EPN Maintenance circuit pack in an EPN after the OLSs were
powered down and bac k up. If the status LEDs on both OLSs are not
showin g yell ow, the n the SYSAM o r the EPN M AINT (Mai ntenan ce) c ircui t
pack may have incorrectly reported the state of the OLSs. Resolve any
alarms on these MOs.
Continued on next page