DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126 Issue 4
June 1999
Maintenance Object Repair Procedures
9-1657TAPE
9
complete. During that time, the r eset tape command entered in the
next step causes a "please wait" message to flash on the terminal
screen while the tape is retensioning, b ut the command will
complete after the retension pass completes.
12. Reset the Tape circuit pack using the reset tape c command where
c
is
the carrier number (a or b). This will c lear out a tape error that indicates
the tape cartridg e had been removed an d reinserted.
13. Release the Tape from its maintenance busy-out state using the release
tape c command where
c
is the carrier number (a or b).
Figure 9-104. Mass Storage System Interactions
Capstan Slot
Picture #2
Label
Picture #1
R/W
Head Slot