DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126 Issue 4
June 1999
Maintenance Commands
8-348test isdn-testcall
8
If the test failed, because the link was up or because there was an active alarm
that the switch needs to report or there was a p roblem with the call, the following
message will be displayed:
Command failed
NOTE:
An entry is made in the error log d escribing why the inad s-link test failed.
Feature Interactions
None
test isdn-testcall
test isdn-testcall group#/member# [minutes #] [schedule]
The test isdn-testcall c ommand starts an outgoing ISDN-PRI test call using the
asynchronous method.
Only 1 ISDN trunk in each port network c an be tested at one time. The maximum
number of asynchronous outgoing test calls that can b e run simultaneously
depends on the numb er of Maintenance/Test circuit packs in the system.
For more information, see Test #258 under “ISDN-TRK (DS1 ISDN Trunk)” in
Chapter 9.
Parameters
For more information, see ‘‘Common Input Parameters’’ at the beginning of this
chapter.
Examples
test isdn-testcall 78/2 minutes 10
group#/member# Specify the trunk over which to orig inate the test call.
minutes # Specify the duration of the test c all in minutes from 1 to 120. The
duration defaults to 8.4 or 9.6 sec onds.