DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126 Issue 4
June 1999
Maintenance Object Repair Procedures
9-746E-DIG-STA (Emulated Digital Line)
9
E-DIG-STA (Emulated Digital Line)
There are 4 tests in the Emulated Digital Line station maintenance test sequenc e
and only one test path in the test seq uence. Once the test seq uence is started,
all tests in the test sequence are exec uted.
E-DIG-ST maintenance monitors and tests ports on the TN800 MAPD circuit pac k
and the hardware connec ted to those ports for lines ad ministered as a digital
station. These include stations with an emulated digital voice termi nal and
stations with an emulated dig ital voice terminal and a linked data module.
Stand-alone data modules and data adaptors in stand -alone mode are not
supported b y the TN800 circuit pack. Circ uit pack maintenanc e is covered by
E-DIG- BD.

Hardware Error Log Entries and

Test to Clear Values

MO Name (in
Alarm Log) Alarm Level Initial Command to
Run1 (a) (b)
1. Where UU is the universal cabinet number (1 for PPN and 2-44 for EPN); C is the carrier
designation (for example, A, B, C, D, or E); SS is the address of the slot in the carrier
where the circuit pack is located (for example, 01, 02, ...); and pp is the two digit port
number (01, 02, 03, ...).
Full Name of MO
E-DIG-STA MINOR test port UUCSSpp l Emulated Digital St.
E-DIG-STA WARNING test port UUCSSpp sh Emulated Digital St.
Table 9-288. Digital Line Error Log Entries - E-DIG-STA
Error
Type Aux
Data Associated Test Alarm
Level On/Off
Board Test to Clear Value
010 Any Any Any test p ort UUCSSpp sh r 1
18 (a) 0 b usyout port UUCSSpp WNG OFF rel port UUCSSpp
130 (b) None WNG ON test p ort UUCSSpp sh
257 (c) 40971 None
1537 (d) 40968 None WNG OFF
1793 (e) Voice and Control Local
Loop Test (#13) MIN/
WNG2ON test port UUCSSpp l r 3
2049 (f) NPE Crosstalk Test (#9) MIN/
WNG2ON test port UUCSSpp l r 3
Continued on next page