DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126 Issue 4
June 1999
Maintenance Object Repair Procedures
9-1201PGATE-BD (Packet Gateway Circuit Pack)
9
Table 9-477. TEST #52 Control Channel Loop-Around Test
Error
Code Test
Result Description/ Recommendation
None
2100 ABORT Could not allocate the necessary system resources to run this test.
1. Retry the command at 1-minute intervals for a maximum of 5 times.
FAIL The circuit pack failed to return the circuit pac k code or vintage.
1. Retry the command a few times for a maximum of 5 times.
2. If the problem continues to fail, and if the circuit pac k is one of the Port
circuit packs, reseat the circuit pack. Otherwise, if the circ uit pack is one
of the Processor Complex circuit packs, see
Repla cing SPE Circui t Packs
in Chapter 5, ‘‘Alarms, Errors, and Troubleshooting’’ for how to pull out
and reinsert the circuit pack.
3. Retry the command a few times for a maximum of 5 times.
4. If the problem continues to fail, and if the circuit pac k is one of the Port
Circuit Packs, replace the circuit pack. Otherwise, if the circuit pac k is
one of the Processor Complex Circuit Packs, see
Replacing SPE Circuit
Packs
in Chapter 5, ‘‘Alarms, Errors, and Troubleshooting’’ for how to
replace the circuit pack.
5. Retry the command a few times for a maximum of 5 times.
PASS Communication with this circuit pack is successful.