DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126 Issue 4
June 1999
Maintenance Commands
8-108display system-parameters maintenance
8
Scheduled Maintenance
A series of maintenance tests and op erations runs automatically every day
according to the schedule and setting s specified in the following fields.
CPE Alarm
Activation
Level
Indicates the minimum level (Major, Minor or Warning ) at which the
Customer-Provided Equipment (CPE) alarm is activated . If the
level is “none,” the CPE does is not activate d for any alarm. (none)
NOTE:
The CPE alarm is always activated when the switch goes into
Emergency Transfer, regardless of the CPE Alarm Activation
Level setting.
Start Time The hour and minute in 24-hour notation at which d aily scheduled
maintenance will begin r unning. (22:00)
Stop Time The hour and minute when scheduled daily maintenance will stop
running. If any daily maintenanc e operations are not complet ed
by this time, the system will note where in the seq uence it
stopped and perform those operations d uring the next scheduled
daily maintenance.
Daily
Maintenance This display-only field simpl y represents the series of tests that
are always run by maintenance software a s part of daily
maintenance.
Save
Translation This field indicates on which d ays translation data in memory will
automatically be saved to the Mass Storage System disk and/or
tape devices d uring scheduled maintenance. The save operation
is first made to disk, followed b y a disk backup to tape. On
syste ms wit h dup lic ated SPEs , tran slati on da ta is sa ved o n bot h
SPEs. Vali d ent ries a re daily, days of the week, or no. “ No”
specifies that no automatic saves are to be executed . (daily)
Control Channel
Interchange Each port network has a pair of TDM busses c alled A and B,
each of which has a set of time slots d edicated to use b y the
control channel. At any one time, the c ontrol channel in each PN
is carried on only one of the two b usses. This field indicates on
which days the cont rol channel in each port networ k will be
switched from one of the pai red TDM busses to the other. Valid
entries are daily, days of the week, or no. “No” specifies that no
interchange be exec uted. (no)