DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126 Issue 4
June 1999
Maintenance Object Repair Procedures
9-930INADS (INADS Link)
9
6 0 INADS did not send the acknowledgment message to the ‘‘test inads alarm’’
message.
1. Verify that the INADS phone number and switch product id are correct via
the Maintenance-Related System Parameters Form.
2. Verify INADS is up and running.
3. Retry the command.
7 0 INADS sent a negative acknowledgment to the ‘‘TESTING INADS LINK’’
message.
1. Verify that the product id on the switch and in the INADS database are the
same. Use the Maintenance-Related System Parameters Form to
determine the product id the switch has.
2. Rerun the test.
8 0 Internal system error; system received an invalid return code.
9 0 Internal system error
1. Try the command again at 1-minute intervals up to 5 times.
10 0 There is already a test inads-link command in progress.
1. Wait 10 minutes for the present command to finish.
2. Review the results of the present command by viewing the Error Log and
selecting the c ategory ‘‘inads-link.’’
11 0 The switch is trying to report alarms to INADS. The test cannot be run at this
time.
1. Wait 10 minutes and retry the command.
Table 9-357. INADS Link Test Error Log Entries — Continued
Error
Code Test
Result Description/ Recommendation
Continued on next page