DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126 Issue 4
June 1999
Maintenance Object Repair Procedures
9-644DS1-FAC (DS1 Facility)
9
DS1 Converter Performance Measurements Report
The DS1 Converter Performance Measurements provide link p erformance
measurements for the DS1 facilities.
When no facility alarms exist on the DS1 facility, events that indicate a
degradation in the p erformance of the DS1 facility are monitored and recorded.
These events will generate approp riate alarms when performance of the DS1
facility has degrad ed below acc eptable levels. These measurements inc lude
errored seconds, bursty seconds, severely errored seconds, and failed seconds.
There are two DS1 Converter Performance Measurements Sub-reports. The first
sub-report, DS1 Converter Performance Measureme nts Summary Report,
provides information on the worst 15 minute in terval of data, the total for 24 hours
of data and the current 15 minute c ounter for each of the above men tioned
counters.
The second sub-report, DS1 Converter Performance Measurements Detailed
Report displays a deta iled log for the last 96 15-minute intervals f or each of the
above mentioned counters.
The DS1 Converter Performance Measurements Summary Report can be
accessed with list measurements ds1-facility summary UUC SSf
[print/schedule]. A more detailed version of the report i s accessed with list
measurements ds1-facility log UUCSSf [print/schedule].
The user can reset all hardware and software measurement c ounters for a given
facility with clear measurements ds1-facility UUCSSf. The

Counted Since

time
is also reset and the

Number of Valid Intervals

count is set to zero.
The reports are printed on the screen or , by using the

print

option, on a printer
attached to the terminal.
Clearing Firmware Errors
DS1 CONV error reports are generated by firmware autonomously, they are not
associated with system tec hnician demanded tests. Therefore, test board clear
command does not affec t the error status known by the DS1 CONV firmware. To
clear all the on-board firmware-d etected errors uncond itionally, execute the clear
firmware-counters command.