DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126 Issue 4
June 1999
Maintenance Commands
8-177reset host-adapter
8
Parameters
Examples
Simplex PNC: reset fiber-link 1
Duplex PNC: reset fiber-link 1
reset host-adapter
reset host-adapter C
This command resets and initializes the host-ad apter circuit on the MSSNET
circuit pack. Up on successful comp letion, the host-adapter is p ut into service
and all alarms active for that host-ad apter circuit are cle ared.
The cabinet is always 1 and need not be specified. Car rier a or b must be
spec ified only on syst ems wi th dup lic ated SPEs .
This command will abort if any other MSS operation has a lready begun.
Failure of this command will plac e the host-adapter in the uninstalled sta te,
preventing all maintenance tes ting, including d emand testing, of the failed
host-adapter. The reset must pass to p ut the host-adapter back i nto service.
When the host-adapter is taken out of servic e due to failures of its tests, or fails a
reset and becomes uninst alled, the attached tape and disk are also placed in the
uninstalled state and all ac cess by system software, maintenance tests and
commands includ ing reset are blocked from exec ution.
reset maintenance
reset maintenance UUC
This command performs a reset on a sp ecified maintenance c ircuit pack.
Specifying cab inet 1 resets the PPN SYSAM circuit pack on the selected carrier,
dropping any remote or local logins. Specifying cabinets 2 through 22 resets the
EPN maintenance circ uit pack in the ‘a’ carrier of the sp ecified cab inet, dropping
any local login to that circ uit pack.
fiber# The administered number of the fiber link (1-27). On critical re liability
systems (duplicated PNC), this number designates a fib er link pair; the
following qualifier spe cifies which fiber in the p air is to be reset.
a-pnc, b-pnc On critical reliab ility systems (duplicated PNC), this distinguishes
between the two fibers in a d uplicated pair. On system s with simplex
PNC this is always a-pnc and need not be specified.