DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126 Issue 4
June 1999
Maintenance Object Repair Procedures
9-1217PGATE-PT (Packet Gateway Port)
9
Notes:
a. This error occurs when the Packet Gateway Port Local Loop -Around Test
(#610) fails. Execute the test port UUCSSpp long command and see the
repair procedures for test # 610.
b. This error occurs when a Packet Gateway por t detects an overrun or an
underrun condition that may be indicative of a hardware p roblem on the
port. The Packet Gateway Port Local Loop- Around Test (#610) should be
executed via the test port UUCSSpp long command to determine if a
hardware problem exists. See the repair p rocedures for test #610.
c. This error occurs when the Level 1 State Query Test (#613) fails or when
the Packet Gateway port detec ts that the Clear To Send (aux data 1) or
Data Carrier Detect (aux data 2) lead is "low" in the RS423 cable
1538 (l) 0 Session Status Query
Test (976) MINOR OFF
2049
to
2303 (f)
1-64
2305
to
2364 (g)
1,
129
2305
to
2364 (h)
57,
185
2305
to
2364 (i
35768
2560
to
2815 (j)
1-4156,
39865-
39924
2817 (k) Link Status Test
(#614) MINOR OFF test port UUCSSpp r 2
3585 0-1 Packet Gateway
Switched Port
Loop-Around Test
(#599)
MAJOR ON test port UUCSSpp l r 3
1. Run the Short Test S equence first. If all tests pass, run the Long Test S equence. Refer to th e appropriate
test description and follow the recommended proc edures.
Table 9-485. PGATE Port Error Log Entries
Error
Type Aux
Data Associated Test Alarm
Level On/Off
Board Test to Clear Value
Continued on next page