DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126 Issue 4
June 1999
Maintenance Object Repair Procedures

9-400CLAN-BD (Control LAN Circuit Pack)

9
Packet Interface Test (#598)
This non-destructive test chec ks the packet bus inter face circuitry on the CLAN circuit pack. Test failure indicates faulty circuit pac k.
Table 9-167. TEST #597 Invalid LAPD Frame Error
Counter Test
Error
Code Test
Result Description/ Recommendation
2000 ABORT Did not receive circuit pack test response within the allowable time period .
1. Retry command at 1-minute intervals, up to 5 times.
2. If the problem persists, reset the circuit pack (reset board UUCSS).
3. If the test fails again, replace the circuit pac k .
2100 ABORT Could not allocate the necessary system resources to run this test.
2500 ABORT Internal system error.
1. Retry the command at 1-minute intervals, up to 5 times.
1-10 FAIL The circuit pack detects LAPD frame errors. The error code indicates the
value of the on-board error counter.
1. Retry the command at 1-minute intervals, up to 5 times.
2. If the test continues to fail, execute the Packet Interface Test (#598) (test
board UUCSS long).
3. If Packet Interface Test (#598) fails, refer to Packet Bus repair procedures.
PASS Circuit pack detects no errors.
Continued on next page
Table 9-168. TEST #598 Packet Interface Test
Error
Code Test
Result Description/ Recommendation
2000 ABORT Did not receive circuit pack test response within the allowable time period .
1. Retry command at 1-minute intervals, up to 5 times.
2. If the problem persists, reset the circuit pack (reset board UUCSS).
3. If the test fails again, replace the circuit pac k .
Continued on next page