Lucent Technologies Release 7 Receive FIFO Overflow Error Counter Test (#596)

DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126 Issue 4 June 1999
Maintenance Object Repair Procedures
9-398CLAN-BD (Control LAN Circuit Pack)
9
Receive FIFO Overflow Error Counter Test (#596)
This test is non-destructive. When the CLAN circ uit pack detec ts packet bus
buffer overflow, it increments the error on the FIFO Overflow error counter. This
test reads and clears the c ounter.
1-10 FAIL Circuit pack detects parity errors. The Error Code indicates the value of the
on-board error counter.
1. Retry the command at 1-minute intervals, up to 5 times.
2. If the test continues to fail, execute the Packet Interface Test (#598) (test
board UUCSS).
3. If Packet Interface Test (#598) fails, see Packet Bus repair procedures.
PASS Circuit pack detec ts no errors.
If errors are: Then they may be due to:
Occasional Statistical buffer sizing
Persistent Circuit pack congestion that requires redistribution of traffic load
Table 9-166. TEST #596 Receive FIFO Overflow Error
Counter Test
Error
Code Test Result Description/ Recommendation
2000 ABORT Did not receive circuit pack test response within the allowable time period .
1. Retry command at 1-minute intervals, up to 5 times.
2. If the problem persists, reset the circuit pack (reset board UUCSS).
3. If the problem persists, replace the circuit p ack.
2100 ABORT Could not allocate the necessary system resources to run test.
2500 ABORT Internal system error.
1. Retry the command at 1-minute intervals, up to 5 times.
Continued on next page
Table 9-165. TEST #595 PPE/LANBIC Receive Parity Error Counter Test — Continued
Error
Code Test Result Description/ Recommendation
Continued on next page