DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126 Issue 4
June 1999
Maintenance Object Repair Procedures
9-1140PDATA-BD (Packet Data Line Circuit Pack)
9
Error Log Entries and Test to Clear Values
Notes:
a. Error type 1 indicates the circ uit pack has stopp ed functioning or has
been physically removed from the system. This error type does not app ly
to ANN-BD, DETR-BD, S-SYN-BD, M/T-BD, or CLSFY-BD. The alarm is
logged ap proximately 11 minutes after removal of the circui t pack or
failure of the SAKI Sanity Test (#53).
Check for the physical p resence of the circuit pa ck in the slot indicated b y
the alarm. If the circuit pac k is not present, insert one of the p roper type. If
the circuit pac k is present and its red LED is lit, see
LED Alarm Without Alarm Log Entry
in Chapter 7, ‘‘LED Interpretation’’.
Table 9-453. PDATA Board Error Log Entries
Error Type Aux
Data Associated Test Alarm
Level1
1. Major or Minor alarms may have been downgraded to Warning alarms based on the values used in the
set options command.
On/Off
Board Test to Clear Value
02
2. Run the Short Test S equence first. If all tests pass, run the Long Test S equence. Refer to the appropriate
test description and follow the recommended proc edures.
Any Any Any test port UUCSSpp sh r 1
1(a) None MINOR ON
18(b) Busyout Board WARNING OFF release board UUCSS
257(c) CC Loop Test
(#52) MINOR ON test board UUCSS r3
513(d)
769(e)
1025(f) 4363 NPE Audit Test
(#50)
1293(g) 46088 to
46089 MINOR ON
1538(h) 46082 MINOR ON
1793(i) 46080 MINOR ON
2306(j) 46081
3330(k) 46083 MINOR ON
3840(l) 4096 to
4101
3843(m) 46097
3999(n) Any None