Lucent Technologies Release 7 BRI Port Local LAN Loop Around Test (#618)

DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126 Issue 4 June 1999
Maintenance Object Repair Procedures
9-315BRI-PORT (ISDN-BRI Port), ABRI-PORT (ASAI ISDN-BRI Port)]
9
BRI Port Local LAN Loop Around Test (#618)
This test is destructive.
This test, which verifies the connectivity of a BRI p ort across the LAN Bus,
executes only if the port is out-of-ser vice. The test aborts if calls assoc iated with
the port are in-progress. Failures of this test indic ate either on-board faults
associated with the BRI-PORT hardware on the circuit pack , or problems with the
LAN Bus, which is used to form c onnectivity between the switc h and the
BRI-PORT.
The dotted lines in Figure 9-14 show how a Loop Around Test is performed
across the Packet Bus for the D-channel.
PASS The port is correctly using its allocated time slots.
1. To be sure that this is not an intermittent problem, repeat this test a
maximum of 10 times to make sure it continues to pass.
2. If complaints still exist, examine the station, connections, and wiring.
Table 9-139. TEST #617 NPE Crosstalk Test — Continued
Error
Code Test Result Description/ Recommendation
Continued on next page