DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126 Issue 4
June 1999
Maintenance Commands
8-367upgrade software
8
The following display shows a typ ical result when upgrade software
DG3v01.02.1.13.0 is ent ered on a sy stem wi th du plic ated SPE.
If the user presses ENTER, then the command will proceed. If, however, the user
presses the CANCEL key then the command will b e terminated.
Output
NOTE:
After initiating an upgrade software, do not touc h the keyboard while
waiting for the command t o execute. Entering a carriage return will cause
the progress and dia gnostic messages to b e lost. If the upgrade is
successful, Command successfully completed is
not
displayed.
Instead, the terminal is logg ed off the system and must be log ged in again.
upgrade software DG3v01.02.1.13.0
This upgrade software command will result in the following actions:
From software version: DG3v01.02.1.13.0
To software version: DG3v01.03.4.13.0
Save CURRENT translation to MSS? yes
Press ENTER to continue or CANCEL to abort the command
upgrade software DG3v01.02.1.13.0
This upgrade software command will result in the following actions:
From software version: DG3v01.02.1.13.0
To software version: DG3v01.03.4.13.0
From compatibility index: 2.2
To compatibility index: 2.2
Save CURRENT translation to both active and standby MSS? yes
Attempt to preserve calls across interchange? yes
Press ENTER to continue or CANCEL to abort the command