Lucent Technologies Release 7 - page 1515

DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126 Issue 4 June 1999
Maintenance Object Repair Procedures
9-831EXP-INTF (Expansion Interface Circuit Pack)
9
1033
(cont’d
.)
ABORT
(cont’d.)
3. If Test #237 passes, reseat the Expansion Interface circuit pack. This will
not be destructive since the circuit pac k cannot be serving as the
Expansion Archangel if it is not in service.
4. Repeat test #237.
CENTER STAGE
If the Expansion Interface circuit pack under test is located in the PPN:
None of the Expansion Interface circuit packs loc ated in the EPNs (on the same
PNC side) are in service (for EPN EIs see the next case).
1. Issue the list fiber-link command and determine if any of the Expansion
Interface circuit packs located in the EPNs are administered as endpoints
of a fiber link. If none of them are then ignore the results of this test.
2. Issue the list conf command for the cabinets and carriers where the
Expansion Interface circuit packs are located in all other EPNs. If the
results returned indicated that the circuit packs are not recognized by
software, they are out of service for this reason.
3. Issue the display errors command and resolve any EXP-PN errors.
Re-execute this test.
4. If the test continues to abort with this error code reseat the Expansion
Interface circuit packs (or DS1 CONV circuit pack if so equipp ed) on the
EPNs. This will not be destructive since the circuit pack cannot be serving
as the Expansion Archangel if it is not in service.
5. Run Test #237 on each of the EPN Expansion Interface circuit packs and
check for EXP-INTF circuit pack Error Type 1281 in the error log. If Error
Type is present and/or Test #237 does not pass, refer to repair procedures
for Test #237.
6. Repeat this test.
1033
(cont’d
.)
ABORT
(cont’d.) If the Expansion Interface circuit pack under test is loc ated in the EPN:
The Expansion Interface circuit located in the PPN is out of service.
1. Run Test #237 on each of the EPN Expansion Interface circuit packs and
check for EXP-INTF circuit pack Error Type 1281 in the error log. If Error
Type is present and/or Test #237 does not pass, refer to repair procedures
for Test #237.
2. Repeat this test.
Table 9-315. TEST #589 Expansion Interface Packet
Interface Test — Continued
Error
Code Test Result Description/ Recommendation
Continued on next page