DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126 Issue 4
June 1999
Maintenance Commands
8-187reset system
8
Parameters
Examples
reset system 1
reset system 4 tape contention-override
Output
Once this command is entered , it may not be canceled . The screen will display
the results of various initialization tests. If the reset co mmand is successful the
user will be logged off (except for reset system interchange). Several
Level Reset levels are numbered as shown in Tab le 8-9 . The execution times listed
are approximations.
Table 8-9. Approximate Recovery Time for System Resets (min:sec)
Level Recovery 2,400 lines 5,000 lines 15,000 lines
Tape Disk Tape Disk Tape Disk
1 Warm Restart :10 :10 :10 :10 :10 :10
2 Cold-2 1:00 1:00 2:00 2:00 4:00 4:00
3 Cold-1 3:00 2:00 5:00 3:00 11:00 7:00
4 Reboot 12:00 4:00 15:00 6:30 23:00 11:00
5 Extended Reboot 15:00 7:00 18:00 10:00 25:00 15:00
Interchange See reset system interchange
Health-override See reset system interchange
Disk Valid only for reset level 4, this spec ifies use of the boot
image stored on disk for the reboot. Disk is the default
device.
Tape Valid only for reset level 4, this spec ifies use of the boot
image stored on tape for the r eboot.
Contention-override Contention control aborts the reset system c ommand if
any other command is curr ently running. The
contention-override option forces other proc esses to
abort, allowing the reset to proc eed.