DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126 Issue 4
June 1999
Maintenance Object Repair Procedures
9-43ALARM-PT (ALARM PORT)
9
Table 9-18. TEST #36 Station Status and Translation Audits and Updates
Error
Code Test
Result Description/Recommendation
ABORT Could not allocate the necessary system resources to run this test.
1. Retry the command at 1-minute intervals for a maximum of 5 times.
1004 ABORT The port received an EXT-DEV failure during the test. The test has been
aborted.
1. Enter test external-device-alarm port UUCSSpp to determine if the
port is reporting an EXT-DEV failure before retesting.
2. If the port has no EXT-DEV failure, retry the command at 1-minute
intervals for a maximum of 5 times.
1006 ABORT This port has been busied out by command.
1. Check Error Log for Error Type 18 (port busied out). If present, release
the port with the release port UUCSSpp command and run the test
again.
2000 ABORT Response to the test request was not received within the allowable time
period.
2100 ABORT Could not allocate the necessary system resources to run this test.
1. Retry the command at 1-minute intervals for a maximum of 5 times.
1 FAIL This failure does not indicate a hardware problem. The switchhook audit
failed, this condition may occur when the audit is performed at the same
time that the terminal equipment goes off-hook.
1. Enter test external-device-alarm port UUCSSpp to determine if the
port is reporting an EXT-DEV failure before retesting. Wait until the port
has no EXT-DEV failure before retesting
2. If the port has no EXT-DEV failure, retry the command at 1-minute
intervals for a maximum of 5 times.
7 FAIL The translation update failed. This does not indicate a hardware problem
but may be an internal software error.
PASS The software and the port pr ocessor have the same status.
Continued on next page