DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126 Issue 4
June 1999
Maintenance Object Repair Procedures
9-107ANN-BD (Announcement Circuit Pack)
9
0-256 FAIL The error code for this result gives the total number of defective
announcements found in speech memory.
When TEST #209 fails with error code 0, the global checksum failed on the
board, but no individual checksum failed.
NOTE:
Since announcements are stored digitally, it is possible for the
announcement checksum test to fail and still have all announcements
sound uncorrupted. When an individual announcement fails the
checksum test, always listen to the announcement before taking any
action. If the announcement sounds corrupted, then re-record it or
delete it. An announcement can be played back by dialing the
extension associated with the announcement number. Use the
display announcement command to find identifying numbers and
extensions of announcements.
1. Check the aux data for error type 14 in the Error Log to determine the
number of the first defective announcement encountered. Play back the
announcement and re-record or delete it if it sounds corrupted. If the
FAIL code for this test was greater than 1, there is more than one
corrupted announcement. To get the numbers of the others, you must
re-record or delete the first one and then rerun this test.
2. If, after deleting and re-recording all defective announcements, the
checksum test still fails, then reset the circuit pack using the reset
board UUCSS command and run this test again.
3. If the test continues to fail, reseat the circuit pack and restore
announcements (this can take up to 40 minutes). Any announcements
recorded since the last save announcements will be lost, and must be
re-recorded. Then run this test again.
4. If the test continues to fail, replace the circuit pack.
!CAUTION:
Replacing the circuit pack will result in loss of integrated
announcements. See Essential Service Infor m ation.
PASS All recorded announcements checksum correctly, indicating that the
speech main memory is functioning properly. User-reported troubles on this
circuit pack should be investigated using other circuit pack and port tests.
Refer to ANN-PT (Announcement Port) Maintenance documentation for a
description of the port tests.
Table 9-40. TEST #209 Announcement Checksum Test — Continued
Error
Code Test
Result Description/ Recommendation
Continued on next page