DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126 Issue 4
June 1999
Maintenance Object Repair Procedures
9-1810TSC-ADM (Administered Temporary Signaling Connections)
9
1145 ABORT There is congestion in the network.
1. Issue the status tsc-administered command at 1-minute intervals a
maximum of 5 times.
2. If the congestion does not clear, disable and enable the Administered TSC
via the change sig-group <group> command.
NOTE: To disable the Administered TSC, display the (administration)
Signaling Group Form via the change sig-group <group> command
where <group> refers to the number of the signaling g roup under which
the suspect TSC is administered. Change the Enab le field to ‘‘n.’’ To
enable the ADM TSC, change the ‘‘Enable’’ field to ‘‘y.’’
3. If the congestion still does not clear, check other nodes in the network.
1146 ABORT The congestion just occurred in the network.
1. Issue the status tsc-administered command at 1-minute intervals a
maximum of 3 times.
2. If congestion does not clear, disable and enab le the Administered TSC via
the change sig-group <group> command.
NOTE: To disable the Administered TSC, display the (administration)
Signaling Group Form via the change sig-group <group> command
where <group> refers to the number of the signaling g roup under which
the suspect TSC is administered . Change the Enable field to ‘‘n.’’ To
enable the ADM TSC, change the ‘‘Enable’’ field to ‘‘y.’’
3. If congestion still does not clear, check the other nodes in the network.
1147 ABORT The ADM TSC is being torn down.
1. Issue the status tsc-administered command at 1-minute intervals a
maximum of 3 times.
2. If ADM TSC is still down, disable and enable the ADM TSC via the change
sig-group <group> command.
NOTE:
To disable the ADM TSC, display the (administration) Signaling Group
Form via the change sig-group <group> command where <group>
refers to the number of the signaling group under which the suspect
TSC is administered. Change the Enable field to ‘‘n.’’ To enable the ADM
TSC, change the ‘‘Enable’’ field to ‘‘y.’’
3. If the ADM TSC is still down, check the other nodes in the network.
Table 9-676. TEST #604 TSC Heartbeat Inquiry Test — Continued
Error
Code Test
Result Description/ Recommendation
Continued on next page