DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126 Issue 4
June 1999
Maintenance Commands
8-68disable suspend-alm-orig
8
Description
This command disables one or more active Suspend Alarm Orig ination entries
from the Suspend Alarm Origination tab le. This command disab les all entries
(boards and por ts) matching the spec ified physic al board location.
NOTE:
A port entry cannot b e disabled with this c ommand. Allowing for d ifferent
ways to disable one or more entries g reatly increases the comp lexity of
updating and displaying the Susp end Alarm Origination tab le.
Defaults
None.
Parameter
Help Messages
N is the maximum number of cab inets in the switch:
Enter board location:[cabinet(1-N)];
carrier(A-E);slot(0-20)
Output
The command returns one of the following messages:
1. If the board spec ifier is not valid:
Board invalid
2. If no entries can be dis abled in the Suspend Al arm Origination table:
Entry not found; no entries disabled
Feature Interactions
None.
board
location This parameter spec ifies the physical b oard location of the hard ware
component that has been rep laced or c orrected. A port loc ation is not
supported b ecause of it complex ities.