DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126 Issue 4
June 1999
Maintenance Object Repair Procedures
9-1219PGATE-PT (Packet Gateway Port)
9
nonzero diagnostics are log ged in this case - ind icating resetting d ue to a
detected error. The auxiliary d ata field of the log entry con tains the
affected logic al channel number.
g. These errors are reported only for PVCs and indicate loss of end-to-end
communication on the PVC. This error indicates that the PVC is "Out Of
Order" due to a network or remote DTE problem (e.g., the remote DTE is
unattached). These errors are consistent with the 1984 CCITT X.25
Recommendation. The logical c hannel number (1 to 64) associated w ith
the PVC is used to offset the the base (2304) to produc e unique error
types. The auxiliary data field for errors of this typ e contain "1" when a
Public Network code has b een received. The auxiliary data field contains
"129" if a Private Network cause code has been received.
h. These errors are reported only for PVCs and indicate loss of end-to-end
communication on the PVC. This error indicates that the PVC is "Network
Out Of Order" due to a network problem. These errors have error types
2305 through 2364 and are consistent with the 1984 CCITT X.25
Recommendation. The logical c hannel number (1 to 64) associated w ith
the PVC is used to offset the the base (2304) to produc e unique error
types. The auxiliary data field for errors of this typ e contain "57" when a
Public Network code or "185" when a Private Network code h as been
received .
i. These errors are only reported for PVCs and indicate the loss of
end-to-end communic ation on the PVC. This error indicates that no
response is received from the end point when the switch attempts to reset
a PVC. This error is reported to the switch by the Packet Gateway p ort
every 6 minutes if no response c ontinues to be received. Errors of this typ e
normally indicate an ad ministrative mismatch for the PVC between the
switch and the attached endpoint/network. These errors have error types
2305 through 2364. These errors are consistent with the 1984 CCITT X.25
Recommendation. The logical c hannel number (1 to 64) associated w ith
the PVC is used to offset the base (2304) to produc e unique error types.
The auxiliary data field of the log entr y contains "35768" for errors of this
type.
j. This error is reported when an X.25 Reset packet is received or sent due
to a Local Procedure Error (i.e., cause value 5 for Public Network or 133
for Private Network Causes). A Local Procedure error usually ind icates
that one side of the interface has detected a protocol procedural error.
The value of the diagnostic c ode (0 to 255) contained in each packet is
used to offset the base (2560) to prod uce unique error types. The auxiliary
data field indic ates whether the error was sent or received by the switc h,