DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126 Issue 4
June 1999
Maintenance Commands
8-145list measurements ds1
8
Output
list measurements ds1
list measurements ds1 UUCSS [print | schedule]
list measurements ds1-log UUCSS [print | schedule]
list measurements ds1-fac UUCSSf [log | summary] [print | schedule]
The list measurements ds1 and list measurements ds1-log commands
provide performa nce measurements on a DS-1 link. The ds1 option provides a
summary report while the ds1-log option provides a detailed report.
The performance measurements of a DS-1 link indic ate the quality of the DS-1
physical interface b etween the system and a far-end system.
The list measurements ds1-fac c ommand provides link p erformance
measurements on a DS1 Converter facility.
The DS1 Converter Complex consists of two DS1Cs connected by one to four
DS1 facilities. This complex allows the di stance between two por t networks to
extend up to 100 miles, thereby extend ing the range of the op tical fiber link within
limited bandwid th (96 channels). A DS1C Complex can b e used in a direct
connectivity config uration or a Center Stage Switch config uration. The DS1
converters may be con nected to an Expansion Interfac e(EI) or a Switch Node
Interface(SNI) via a metallic connec tion.
Port The physical location (cab inet-carrier-slot-port c ircuit) of the marked p ort.
Board-Type The type of circuit pac k with the marked port.
list marked-ports
MARKED-PORT INFORMATION
Port Board-Type
1C0101 DIG-BD
1C0102 DIG-BD
Command successfully completed