DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126 Issue 4
June 1999
Maintenance Commands
8-9Busyout and Release Commands
8
tests require that the object b e released to complete. A WARNING alarm with
error type 18 is logged against each busied out object. All busied out MOs can
be displayed by entering error type 18 in the Error Type field on the Hardware
Errors Report Form (see display errors). The matching release command
returns the maintenance objec t to service, providing the object is not otherwise
incapacitated .
On sys tems w ith d upli cate d SPE, bu syout s are p rese rved a cros s pla nned SPE
interchanges and level 1 syste m resets (Warm). System resets of level 2 or higher
release the busied out objec ts.
A variety of self-explanatory error messag es may be displayed if the command
cannot be executed as entered. In addition to these t here are a number of
numerical error codes which may be displayed in the Error Code field if the
command ABORTS or FAILS as indicated in the Result field. These are explained
in the
Common Abort and Fail Codes
section of this chapter.
The following screen disp lay shows a typical result for busy out board 1c03
(analog line circuit p ack in cabinet 1, c arrier c, slot 7 with three administered
ports):
The following display shows a typ ical result for most maintenance ob jects. See
‘‘Common Output Fields’’ above for an explana tion of the fields displaye d.
busyout board 01C03
Command Results
Port Maintenance Name Alt. Name Result Error Code
01C03 ANL-BD PASS
01C0301 ANL-16-L 5409 PASS
01C0302 ANL-16-L 5416 PASS
01C0303 ANL-16-L 5421 PASS
01C0304 ANL-16-L 5422 PASS
01C0305 ANL-16-L 5411 PASS
Command successfully completed
busyout disk b
COMMAND RESULTS
Port Maintenance Name Alt. Name Result Error Code
01B DISK PASS
Command successfully completed