DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126 Issue 4
June 1999
Maintenance Commands
8-44busyout sp-link
8
This command can be used as a mechanism to turn off memory shad owing of
the standby SPE.
The busyout
will
exec ute eve n if th e stan dby SPE s tate o f healt h is le ss tha n
“functional”, memor y shadowing is already off, or hand shake communication
with the standby is down.
For more information see the following sections at the b eginning of this chap ter:
Busyout and Release Commands, Common Inp ut Parameters, and Common
Output Fields.
busyout sp-link
busyout sp-link
The busyout sp-link c ommand puts the system printer link into a mainten ance
busy state. Placing the system p rinter link in a busyout state prevents ac cess to
the system printer.
The system printer link is a link from the switch to an exter nal printer. This link is
created by admin istering the system printer extension and setting up a call to the
system printer.
For more information, refer to the following sections: Busyout and Release
Commands, Common Input Parameters, and Commo n Output Fields.
busyout tape
busyout tape C
The busyout tape comm and puts the tape into a maintenanc e busy state.
Placing the tape in a busyo ut state prevents read and write acc ess of the tape
except for that requested by demand maintenanc e testing. This command aborts
if the host adapter on the same c arrier is already busied out.
When the host-adapter is busied out, only the demand maintenance b usyout and
test commands are permitt ed on the attached tape in th e same carrier. Reset,
release, scheduled and periodic testing and other system software access are
blocked. In this c ase, the host-adapter must first b e released before the tape c an
be released.
When the host-adapter is taken out-of-servic e due to maintenance test or reset
failures, the tape is also placed in the uninstalled state and all acc ess by system
software, maintenance tests and c ommands, including reset, are b locked.