DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126 Issue 4
June 1999
Maintenance Commands
8-113display test-schedule
8
display test-schedule
Automatic Transmission Measurement System (ATMS) provides advanced
maintenance proced ures for monitoring system trunk facilities. This system
performs transmission tests on system t runks to determine if trunks are
performing satisfac torily. These tests can be initiated in two ways:
Adjustable
Make/Break
Ratio
This field can be of p articular importance when using a modem that
may be transferable from c ountry to country. The intent of this field
is to control the make/break ratios of p ulses and DTMF dialing. The
Intel product information has s upport for the different make/b reak
options for pulse dial ing only.
Intel uses the option “&P0” to selec t a ratio of 39% make and 61%
break for communicatio n within the U.S. and Canada. The option
“&P1” sets a ration of 33% make and 67% b reak for the U.K. and
Hong Kong.
This field is 5 characters long and is case in-sensitive. ( )
Dial Command This field simply denotes the d ialing command of the modem. This
is a fairly standard comm and. (D)
No Answer
Time-Out Most off-the-shelf external modems provid e a timer that abandons
any outbound data c all after a predetermined interval. Some
modems provide for this tim er to be disabled , thus allowing an
outbound call to ring indefinitely. AT&T Paradyne does not provide
this capability with their m odem line, because it is g enerally
undesirable to have an outboun d call attempt ring indefinitely.
The internal modem must have this parameter disa bled or set to at
least 255 seconds.
This is a non-administrable parameter. For the external modem
connection, this paramete r will be the first initialization string to b e
transmitted to the external modem. This field will be visible on the
administration form in disp lay mode only.
This hardcoded constant can be overriden for type approval
applications, sp ecifically in the U.K and other Western European
nations, by the use of the “Misc . Init. Param:” field. (S7=255)
demand user enters command at the System Administr ation
Terminal (SA T) to initiate a test immediately
scheduled schedules tests through a sc hedule form to automatic ally
initiate tests at a predetermined time