DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126 Issue 4
June 1999
Maintenance Commands
8-261status conference
8
Endpoint Miscellaneous (EPT MISC) Information. EPT MISC cont ains
miscellaneous states and co unters for an endpoint. The flags can be a value of y
or n. The counters start with initial value of 0x00, they increment to 0xff, and then
56/64 The 65/64 field is derestrict when operating at per-c hannel
speeds of 64kbp s, 128kbps, 192kbp s, 256kbps, 320kbp s, 384kbps,
512kbps, 768 kbp s, 1472kbps, 1536kbp s, or 1920kbps; it is
restrict when operating at 56kbp s, 112kbps, 168kbp s, 224kbps,
280kbps, 336kbp s, 448kbps, and 672kb ps.
Note that if the conference is c onfigured for Nx56kbs op eration, the
endpoint may signal either vi a capabilities or mode s that is operating
at the proper rate. In such a case, even when we receive
derestrict command which d oes not match the conference
communication mode of restrict, i f the capability ind icates
restrict (MISC capabili ty has restrict displayed on Pa ge 4) the
STAT 56/64 is set to y to indicate 56/64 c ompatibility between the
conference and the endpoint.
VIDEO The Video mode: H.261 (recommended), H.CTX (prop rietary),
H.CTX+ (proprietary), or SG4 (prop rietary) indicate that video is on in
the direction indicated; video-off when the video is off.
MLP Multi Layer Protocol data mode. When Data Mode is administered as
any-mlp or ww-pcs, the MLP mode should be var-MLP. Other
values will affect video status.
The MLP mode sh ould be MLP-off when Data Mode is ad ministered
as none. Again, other values in this mode will affect video status.
H_MLP The High Speed MLP mode. The HMLP mode should be H-MLP-off.
Other values in this mode will affect vid eo status.
LSD Low Speed Data mode. The LSD mode should b e LSD-off. Other
values in this mode will affect vid eo status.
HSD High Speed Data mode. The HSD mode should be HSD-off. Other
values in this mode will affect vid eo status.
CRYPT Encryption mode. The CRYPT mode should be encrypt-off. Other
values in this mode will affect vid eo status.
S/M Single/Multi channel interoperab ility mode. 6B-H0-comp indicates
that the sender is interoperating multiple channels and a sing le
channel (for example, 6B and H0). Not-comp-6B-H0 indicates that
the sender is not interoperating b etween 6B and H0. Normally this
value is Not-comp-6B-H0. Other values in this mode will affect video
status.