DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126 Issue 4
June 1999
Maintenance Object Repair Procedures
9-762ERR-LOG (Error Log)
9
ERR-LOG (Error Log)
The ERR-LOG maintenance object (MO) is responsible for the sanity of the Alarm
Log, the Hardware Error Log, and the Software Error Log. If an inc onsistency is
detected in any one of thes e logs, all logs will be re-initial ized and a hardware
error will be logged against ERR-LOG indicating the time of inco nsistency. There
are no tests and no alarms for the Error Log MO. This MO exists solely for the
purpose of allowing errors to b e logged ag ainst it.

Hardware Error Log Entries

Notes:
a. Indicates that an inconsis tency was detected in either the Alarm Log, the
Hardware Error Log, or the Software Error Log. The system attempts to
recover the logs but, d epending on the extent of the c orruption, some or
all entries in the logs may be lost. Any alar ms that were active at the time
of this error have been cleared. There is no assoc iated test for this error.
The Aux Data value indicates when the inc onsistency was found:
MO Name (in
Alarm Log) Alarm Level Initial Command to Run Full Name of MO
ERR-LOG none none Error Log
Error
Type Aux Data Associated Test Alarm
Level On/Off
Board Test to Clear Value
510 (a) See below none none none none
0 During a p eriodic audit of the Error Log
1 After an extended reboot
2 After a reboot
4 After a Level-3 System Reset (COLD_1)
8 After a Level-2 System Reset (COLD_2)
16 After a Level-1 System Reset (Warm Start)
100 After an internal software audit
2500 After a single-process (MDM) restart