DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126 Issue 4
June 1999
Maintenance Object Repair Procedures
9-1661TAPE
9
712 SCSI sense information indicates that a SEARCH DATA command has satisfied an equal
comparison. This should not happen since this command is not issued by the HA.
713 This indicates that a buffered peripheral device has reached the end-of-medium and data
remains in the buffer that has not been written to the medium.
714 This indicates that the source data did not match the data read from the medium. This
should not happe n since the HA does not issue a ny commands involving comparisons.
715 SCSI sense information returned a reserved sense key. This should not happen.
758 Device returned b usy.
764 Device returned reservat i on conflict status.
801 HA firmware was attempting to process a command requiring system bus acc ess and the
NOGOINT interrupt occurred. This probably indicates that system software failed to enable
bus access before issuing an MSS command requiring it. It also could indicate a system
problem or a HA problem.
802 HA firmware was accessing the system bus and it timed out. This could be a result of MSS
command argument errors, system problems, or a HA problem.
803 HA firmware was accessin g the system bus and received a data-p arity interrupt. This coul d
indicate a system or HA problem.
804 HA firmware was accessing the system bus and received a error detection and correc tion
interrupt. This could indicate a system or HA problem.
805 System bus error test failed.
1001 Firmware error
1002 Cheetah/Pecos error
1003 Both the 68020 and the DMAC tried to access the same location in the SDM concurrently.
1004 HA firmware couldn’t put a response in the response queue because it was full. This could
be the fault of the HA, or system software. However, there is no way to recover, therefore
the HA places itself in held reset.
2001 A critical diagnostic test on the Host Adapter failed making it d angerous to continue
service.
2002 The Host Adapter internal looparound test failed because of data corruption.
3001 An exception occurred indic ating a serious hardware or firmware problem. Additional
information will be placed in HA DPRAM about which exception occurred and the add ress
at which it occurred.
3002 An interrupt occurred when it should not have. This includes interrupts that are a normal
part of command processing bu t that oc curred unexpectedly.
4001 The checksum of the firmware image in memory prior to FLASH PROM programming failed.
Table 9-624. MSS Error Actions — Continued
Code Description
Continued on next page