DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126 Issue 4
June 1999
Maintenance Object Repair Procedures
9-46ANL-16-L (16-Port Analog Line)
9
Aux Data 40975 indicates that the termi nal equipment was on-hook when
ring-tip was detec ted during ring ing. This usually indicates a fail ure in the
terminal equipment or the typ e of terminal has a low ringer imp edance.
Call the terminal equipment and verify that the terminal rings. If the
terminal does not ring, then rep lace it. Otherwise, issue the test port
UUCSSpp command, and follow the p rocedure for Test #48.
Aux Data 40977 indicates that no terminal equipment was connec ted
when ringing was attempted . Run the short test via the test port
UUCSSpp command, and follow the p rocedure for the results of Test #48.
b. This is a software audit error that does not indic ate any hardware
malfunction. Run Short Test Sequence and investigate associated errors.
c. This error type indicates that the c ircuit pack has b een removed or has
been insane for more than 11-minutes. To clear the error, reseat or replac e
the circuit pac k.
d. This is an in-line error and can only be resolved over time. This error
indicates that ringing voltage is absent. If only 1 analog c ircuit pack in the
system has this problem, then replac e the circuit pac k. If only analog
circuit packs o n a particular carrier have this error, then the ringing
generator may not be connec ted to this carrier. If analog circuit packs on
many carriers have this error, then it is p robably a prob lem with the ringing
generator.
e. Test #48 may cause some terminal equipment to ring briefly during daily
maintenance. If this disturb s the customer or the terminal equip ment,
disable it by s ettin g the Tests field on the change station extension form
to n. On some software releases, this will also disab le Tests #6, 7, 161,
and 35.
System Technician-Demanded T ests: Descripti ons
and Error Codes
Always investigate tests in the order p resented in the table belo w when
inspecting errors in the sys tem. By clearing error cod es associated with the
Battery Feed Test,
for example, you may also clear errors g enerated from other
tests in the testing sequenc e.