DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126 Issue 4
June 1999
Maintenance Commands
8-226status bri-port
8
Interpreting Results of BRI-Port Status Reports
Table 8-10 will help to interpret results of the status bri-port command . Find the
combination of output fiel d values contained in y our report and follow the
recommendations for the type of endpoint connec ted to the portStatus Cabinet
status cabinet UU [print]
This command displays the operational status and attrib utes of the specified
cabinet. The output screen d isplays configur ation information for each carrier,
connectivity and alarm in formation for each port network or switc h node, and the
emergency transfer status of the c abinet.
The cabinet number defaults to 1.
Output
Carrier Location The cabinet number and c arrier letter of each carrier in t he cabinet.
PN/SN Number The Port Network number (1-22) or Switch Node number (1 or 2) of the
indicated carrier.
Carrier Type The type of the indicated carrier: processor, port, expansion-control,
switch-node, dup -sw-node or not-used.
Cabinet Type One of the following types:
MCC Multicarrier cabinet
SCC Sing le c arri er ca bine t
S75XE Syst em 75 ( pre -R1V4) s ingl e ca rrier XE cab inet
blank The cabinet type c ould not be d etermined.
status bri-port 1c1701 Page 1 of 1 SPE A
STATUS BRI-PORT
Port: 01C1701
Service State: in-service
Maintenance Busy?: no
Layer 1 State: activated
TEI Value Layer2 State Endpt Extension Endpt SPID Service SPID?
Link1 64 13-established 1010 1010
Link2
Link3