DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126 Issue 4
June 1999
Maintenance Object Repair Procedures
9-21ADX8D-PT (AUDIX Digital Port)
9
Table 9-8. TEST #13 Voice and Control Channel Local Loop Test
Error
Code Test
Result Description/Recommendation
ABORT Internal system error.
1. Retry the command at 1-minute intervals for a maximum of 5 times.
Then try (b).
1000 ABORT System resources required to run this test are not available. The port may
be in use.
1. Use the display port UUCSSpp command to determine the voice
port extension of the p ort. Use the status station command to
determine the service state of the port. If the service state indicates
that the port is in use, you must wait until the port is idle before
retesting.
2. Retry the command at 1-minute intervals for a maximum of 5 times.
1001 ABORT System resources req uired for this test are not availab le.
1. Retry the command at 1-minute intervals for a maximum of 5 times.
1002 ABORT The system could not allocate time slots for the test. The system may be
under heavy traffic conditions, or may have time slots that are
out-of-service due to TDM-BUS errors.
1. If the system has no TDM-BUS errors, and is not handling heavy
traffic, retry the command at 1-minute intervals for a maximum of 5
times.
1003 ABORT The system could no t allocate a tone receiver for t he test. The system may
be oversized for the number of Tone Detectors present, or some Tone
Detectors may be out-of-ser vice.
1. Resolve any TTR-LEV errors.
2. Resolve any TONE-PT errors.
3. If neither condition exists, retry the command at 1-minute intervals for
a maximum of 5 times.
1004 ABORT The port was put in use during the test.
1. Use the display port UUCSSpp to determine the voice port extension
of the port. Use the status station command to d etermine the service
state of the port. If the service state indicates that the port is in use,
you must wait until the port is idle before retesting.
2. Retry the command at 1-minute intervals for a maximum of 5 times.
2000 ABORT Response to the test request was not received within the allowable time
period.
1. Retry the command at 1-minute intervals for a maximum of 5 times.
2100 ABORT Could not allocate the necessary system resources to run this test.
1. Retry the command at 1-minute intervals for a maximum of 5 times.
Continued on next page