DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126 Issue 4
June 1999
Maintenance Commands
8-254status conference
8
Drop Reason The reason for the channel’s disconnec t:
2-pri This drop reason occurs when an ad ministration error causes
a mismatch in primary-secondary designation for a cascade link. This
mismatch shows that both MCUs are ad ministered as primaries (see
“Cascading ” for a description of primary-secondary c ompatibility).
2-sec This drop reason occurs when an ad ministration error causes
a mismatch in primary-secondary designation for a cascade link. This
mismatch shows that both MCUs are ad ministered as secondaries
(see “Cascading ” for a description of p rimary-secondary
compatibility).
Agent The reservation agent has caused the c all to disconnect (for
example, the agent has chang ed a connected dial-out destination
number).
Bandwidth mismatch between a call and the conference it
attempted to join. For example, a 56-kb ps call attempted to join a
64-kbps conferenc e that does not allow rate adaptation.
BondHshake BONDing handshake drop reason can be caused due
to the following reasons: information channe l parameter not
supported or invalid , parameter negotiation terminated out of
sequence, timer expired because of the second ary channels did not
establish, or BONDing framing was not detected for one of the other
channels.
Busy This dial-out drop reason occ urs when the MCU detects that
the conferee’s terminal equip ment is busy. This drop reason is
detected by an ISDN cause value (for example h0). See “Dial-out” for
a description of CPTR usage.
Chair disconnected the endpoint, using either Chair Command
Disconnect (CCD) or Chair Command Kill (CCK) sig nals.
Conf End The conference was ended d ue to reaching stop time for
a reserved conference or d ue to an active conference being
converted to file.