DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126 Issue 4
June 1999
Maintenance Commands
8-350test led
8
test led
test led [all | cabinet UU | port-network PN# | switch-node SN# | a-pnc |
b-pnc] [repeat #]
This command verifies that a spec ified cabinet, p ort network, PNC or switch
node is recognized by the system. It is also useful for identifyi ng a port network,
cabinet, or PNC (A or B).
When test led is entered, the red, green and yellow circuit pac k LEDs are turned
on until all administered car riers in the specified g roup have been lit for 2
seconds. They are then turned off in the same ord er in which they came on. The
cycle can b e repeated a number of times with the repeat option. Once all of the
repeat cycles are co mpleted, all affected LEDs are restored t o reflect their
current status.
test link
test link link [short | long] [repeat | clear] [schedule]
This command verifies that the spec ified link is administered a nd performs a
series of tests on the link.
Parameters
Output
Port Each link is identified b y a number (1-16) assigned on the
Communication-Interface Links form. Displa y communication-interface
links shows the location and identific ation of each link.
Port The location of the port on a Packet Gateway ci rcuit pack assoc iated with the
link being tested.