DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126 Issue 4
June 1999
Additional Maintenance Procedures
6-8Software updates
6
Table 6-2. Software Update—Duplicated SPE
Step Time
(min) Remarks
change sys-par maint 2 Note the current settings of the Save
Transl ation , SPE Inte rcha nge, and A larm
Origination Activated fields and then set
them to n. Set CPE Alarm Activation Level
to none. Make sure scheduled daily
maintenance is not set to run during the
update.
save announcements 40 These steps create a back up tape in case
the update fails and a b ackout is
necessary. Saving announcements m ay
be skipped if display announcements
shows no administered announc ements.
save translation 2
backup disk 10
Remove tapes and
clean tape drives. 5 This p rocedure is desc ribed under
‘‘TAPE’’ in Chapter 9, ‘‘Maintenance Object
Repair Procedures’’.
Insert the tapes
containing the new
software
2 Wait for the tape to retension itself.
list config
software-version long 5 Make sure the tapes have the expected
version number.
restore disk install
both 10 Copies new ta pe files to disk. If upd ating
from
a load earlier than 6.0, substitute for
this step the following seq uence: copy
announce tape, save translation tape,
then restore disk full both.
Continued on next page