DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126 Issue 4
June 1999
Maintenance Object Repair Procedures
9-121ANNOUNCE
9
ANNOUNCE
The ANNOUNCE maintenance object logs an e rror in the hardware error log
when either of the following occ urs:
■A save announcement or restore announcement command d oes not
complete succes sfully.
■The system fails to restore announcements from tape or disk at boot time.

Hardware Error Log Entries

Notes:
a. Error occurred while saving announc ements. See Table 9-49 for an
explanation of aux data and recommended rep air actions.
b. Error occurred while saving announcements to the standby SPE. (See the
table in the next section for an explanation of aux data and recommended
repair actions.)
c. User pressed the CANCEL key while announc ement was being saved by
the ac tive SPE.
d. User pressed the CANCEL ke y while announcement was being saved by
the st andb y SPE.
e. Error occurred while restoring anno uncements. See Table 9-49 for an
explanation of aux data and recommended rep air actions.
f. The PORT field for this error displays which SPE was active when the error
occurred.
MO Name (in
Alarm Log) Alarm
Level Initial Command to Run Full Name of MO
ANNOUNCE n one none ANNOUNCEMENT
Table 9-48. ANNOUNCE Error Log Entries
Error Type Aux Data Associated Test Alarm
Level On/Off
Board Test to Clear
Valu e
1(a)(f) any None
257(b)(f) any None
513(c)(f) 0 None
769(d)(f) 0 None
1025(e)(f) any None