DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126 Issue 4
June 1999
Maintenance Object Repair Procedures
9-1525STO-DATA (Stored Data)
9
h. Error types 2561, 2817, 3073, and 3329 indic ate that the checksum test
for the two copies of the boot i mage on the Carrier A tape, Carrier A di sk,
Carrier B tape, or Carrier B disk, respec tively, are inconsistent. (Auxiliary
data 30004 indicates that t he device could no t be read, auxiliary data
30014 indicates that the file typ e is invalid, and auxiliary d ata 30201
indicates the checksum is bad).
i. Error types 3585 and 3841 indic ate that a save translation to disk failed on
carrier A or B, respectively.
1. Refer to the alarm log and clear any H- ADAPTR, DISK, TAPE, or
DUPINT alarms first.
2. Enter save translation. This operation may take up to an hour.
Table 9-578. Auxiliary Data for Error Types 2049 and 2305
Aux
Data Description / Recommendation
1 The secondary boot image on the disk was used to boot the system.
1. Run test stored-data long to verify that the primary copy of the boot image is
invalid.
2. Restore the bad copy from the tape by issuing a restore disk command.
3. Run test stored-data long to retire the alarm.
2 The primary boot image on the tape was used to boot the system.
1. Run test disk long for the disk on the SPE carrier which reports the failure. If any
tests fail, refer to DISK repair procedures for further action.
2. ) Run test stored-data long to verify that the primary and secondary copies of the
boot image on the di sk are invalid.
3. Restore the copies on the primary device from the copies on the secondary d evice
by issuing a restore disk command.
4. Run test stored-data long to retire the alarm.
3 The secondary boot image on the tape was used to boot the system.
1. Run test stored-data long to verify that the primary and secondary copies of the
boot image on the di sk and the primary co py of the boot image on t he tape are all
invalid.
2. Insert a backup tape of the correct vintage.
3. Run save translation tape to get the latest translation on the backup tape.
4. Run copy announcement tape to get the latest announcements on the backup
tape.
5. Run restore disk to copy the good boot images, translations, announcements and
software update files to the disk.
6. Run test stored-data long to retire the alarm.