DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126 Issue 4
June 1999
Maintenance Object Repair Procedures
9-1816TTR-LEV (TTR Level)
9
Error Log Entries and Test to Clear Values
!WARNING:
The Alarm is upgraded to MAJOR if the Base Tone Generator is set to 12 (France).
Notes:
a. Error code 1 does not indic ate a current error condition. It indicates that
the number of DTMR ports in service was b elow the administered
threshold, but is now equal to or greater than the threshold. These errors
are typically generated during boot time or ot her transitional states when
the ports are being brought into service.
b. The total number of DTMR ports currently in servic e is below the
administered threshold. To clear the alarm, refer to the repai r procedure
described above.
c. Error code 3 does not ind icate a current error cond ition. It indicates that
the number of GPTD ports in service was b elow the administered
threshold, but is now equal to or greater than the threshold. These errors
are typically generated during boot time or ot her transitional states when
the ports are being brought into service.
d. The total number of GPTD ports currently in service is below the
administered threshold. To clear the alarm, refer to the repai r procedure
describe abov e.
Table 9-677. TTR Level Error Log Entries
Error
Type Aux
Data Associated Test Alarm Level On/Off
Board Test to Clear Value
1 (a) 1 None
2 (b) 2 WARNING
(See WARNING
message below)
OFF
3 (c) 3 None
4 (d) 4 WARNING OFF
5 (e) 5 None
6 (f) 6 WARNING OFF
7 (g) 7 MAJOR OFF
8 (h) 8 MINOR OFF
9 (i) 9 MINOR OFF