DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126 Issue 4
June 1999
Maintenance Commands
8-306status station
8
Output
The following display shows a typ ical result when status sp-link is entered.
status station
status station extension [print]
The status station command disp lays internal software state information for
diagnosis. This command c an help locate facili ties to which the station is
communicating.
Output
Link State: The operational state of the link:
up A call is currently set up to the system printer.
down The link is administered but a c all is not currently set up to the
printer.
extension not administered An extension has not been
administered for the system p rinter on the features-related system
parameters form.
Number of
Retries: The number of times the switch has tried to establish the link since a
request to set it up has been rec eived. This field is displayed only when
the link is down. The maximum value display ed is 999.
Maintenance
Busy? Whether maintenance testing is being performed on the system pr inter
link. A blank is displ ayed if the system printer link is not ad ministered.
Type The type of equipment admini stered for the extension.
Extension The extension number specified on the command line.
Port The location of the port assigned to the station.
Call Park Whether the station has a call parked.
status sp-link SPE A
SYSTEM PRINTER LINK STATUS
Link State: down
Number of Retries: 0
Maintenance Busy? no