DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126 Issue 4
June 1999
Maintenance Object Repair Procedures
9-220ATM-NTWK (ATM Network Error)
9
23 (a) User rejects all calls with calling line identification restriction (CLIR).
This cause is returned by the called party when the call is offered
without calling party number information and the called party requires
this information.
27 (a) Destination out of orde r . This cause indicates th at the destination
indicated by the user cannot be reac hed because the interface to the
destination is not functioning correctly. The term “not functioning
correctly” indicates that a signalling message was unable to b e
delivered to the remote user ; for example, a physic al layer or SAAL
failure at the remote user or user equipment off-line.
28 (a) Invalid number format (address incomplete). This cause indicates that
the called user cannot be reached bec ause the called party number
is not in a valid format or is not complete.
30 (a) Response to STATUS ENQUIRY. This cause is included in the
STATUS message when the reason for generating the STATUS
message was the prior receipt of a STATUS ENQUIRY message.
31 (a) Normal, unspecified. This cause is used to report a normal event only
when no other cause in the normal class applies.
32 (a) DTL transit not-my-node ID
RESOURCE UNAVAILABLE
35 (a) Requested VPCI/VCI not available. This cause indicates that the
requested VPCI/VCI is not available.
36 (a) VPCI/VCI assignment failure
37 (a) User Cell Rate not available
38 (a) Network out of order. This c ause indicates that the network is not
functioning correctly and that the condition is likely to last a relatively
long period of time; for example, immediately re-attempting the call is
not likely to be successful.
41 (a) Temporary failure. This cause indicates that the network is not
functioning correctly and that the condition is not likely to last a long
period of time; for example, the user may wish to try another call
attempt immediately.
43 (a) Access information discarded. This cause indicates that the network
could not deliver access information to the remote user as requested;
that is, ATM adaptation layer parameters, Broadband low layer
information, Broadband high layer information, or sub -address as
indicated in the diagnostic.
45 (a) No VPCI/VCI available. This cause indicates that there is no
appropriate VPCI/VCI presently available to handle the c all.
Table 9-95. Error Codes and Aux Data values ATM-NTWK — Continued
Cause Code/
Error Type Aux
Data Cause Codes Description