DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126 Issue 4
June 1999
Maintenance Object Repair Procedures
9-341BRI-SET, ASAI-ADJ, BRI-DAT
9
m. Certain ISDN-BRI cause codes are logg ed by switch software. The cause
code can b e determined from the following formula:
If the error type is greater than 3968, then the ISDN-BRI cause cod e is
equal to the error type minus 3968. This cod e was sent to the endpoint b y
the switch.
If the error type is less than 3968, then the ISDN-BRI cause cod e is equal
to the error type minus 3840. This code was sent to th e switch by the
endpoint.
A description of the va rious ISDN-BRI cause values is contained in Ta b le
9-150. This table also contains recommend ed system technician a ctions
associated with the cause value. Further information can also be found in
the Lucent ISDN-BRI Specification (801-802-100). In ad dition, the Aux
Data field of the Error Log entry co ntains additional diag nostic information.
n. Error 3847 indicates that sets on the port d o not support level 3
initialization. Consult the Set Service documentation
o. For the Error 2567 indicates that the version of ASAI is not suppo rted,
check version of the software running on the ASAI or Lucent adjunct.
87 Internal switch
audit There is an inconsistency in switch data
records.
1. There is no action needed si nce the
switch has corrected the data
inconsistency.
2. If a number of these errors co ntinue to
occur, then escalate to next ti er.
Table 9-149. ASAI CAUSE VALUES — Continued
Error
Code Test Result Description/ Recommendation
Continued on next page