DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126 Issue 4
June 1999
Maintenance Object Repair Procedures
9-390CLAN-BD (Control LAN Circuit Pack)
9
Notes:
a. Error Type 1: Circuit pack stopp ed functioning or is no t physically
present.
1. Verify that the circuit pack is p resent.
2. If circuit pack is present, reset the circuit pac k (reset board
UUCSS).
3. If the error persists, replace the c ircuit pack.
b. Error Type 18: The CLAN circuit pack b usied out.
c. Error Type 217: applies to 3 circ uit packs:
d. Error Type 257: Transient communication problem between switc h and
circuit pack; d oes not affect service and c an be ignored.
1. Ignore this error.
Repetitive failures of the Control Channel Loop Test indicate circ uit pack
hardware failure.
e. Error Type 513: Circuit pack detec ted and reported h ardware failure.
1. Reset the circuit pack (reset board UUCSS).
3842 (s)
3844 (t) Any
3999 (p) Any None
Circuit
pack Description
Maintenance/Test More than one Maintenance/Test circuit pack in the port
network
Tone Detector
Call Classifier More than 10 circuit packs in the system.
1. Remove the circuit pack(s) against which the error is
logged.
Continued on next page
Table 9-162. CLAN-BD Err or Log Entries
Error
Type Aux
Data Associated Test Alarm
Level On/Off
Board Test to Clear Value
Continued on next page