DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126 Issue 4
June 1999
Maintenance Object Repair Procedures
9-419CO-DS1 (DS1 CO Trunk)
9
1020 ABORT The test did not run due to a p reviously existing error on the sp ecific port or
a more general circuit pack error.
1. Examine Error Log for existing errors against this port or the circuit pack
and attempt to diagnose the previously existing error.
2000 ABORT Response to the test request was not received within the allowable time
period.
2100 ABORT System resources required for this test are not available.
1. Retry the command at 1-minute intervals for a maximum of 5 times.
2053 ABORT At least one of the following errors was found on the DS1 circuit pack: loss of
signal (1281), blue alarm (1793), red alarm (2049), yellow alarm (2305), or
hyperactivity (1537).
Look for the above error types in the Hardware Error Log and follow the
procedures given in the appropriate DS1-BD or UDS1-BD maintenance
documentation for the l isted error types.
Table 9-176. TEST #7 Conference Circuit Test — Continued
Error
Code Test
Result Description/ Recommendation
Continued on next page