DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126 Issue 4
June 1999
Maintenance Object Repair Procedures

9-908HYB-LINE (Hybrid Line)

9
Error Log Entries and Test to Clear Values
Notes:
a. The data link between the port and the terminal is not operational. (An off-board problem was d etected by p ort circuit). Verify that the Hybrid set is connected and that the Electronic Power Feed (EPF) test passes. If data transmission problems are experienc ed, check for d efective wiring or a defective voice termina l, or move terminal closer to the switch (reduc e the
Table 9-347. Hybrid Line Error Log Entries
Error
Type Aux
Data Associated Test Alarm
Level On/Off
Board Test to Clear Value
01
1. Run the Short Test Sequence first. If all tests pass, run the Long Test Sequence. Refer to the
appropriate test description and follow the recommend ed procedures.
0 Any Any Any test port UUCSSpp sh r 1
1(a) 40987 None WARNING OFF
15(j) Any Hybrid Line Audits
Test(#161)
18(b) 0 busyout port
UUCSSpp WARNING OFF release port UUCSSpp
130(c) None WARNING ON test p ort UUCSSpp sh
257(d) 40988 None MIN/WRN OFF
513(e) 40965 Hybrid Line Audits
Test (#61) WARNING OFF test port UUCSSpp sh r 4
769(f) Remote Dig
Looparound Test
(#59)
WARNING OFF test port UUCSSpp sh r 3
1025 Hybrid & Conf.
Circuits Test (#57) MIN/WRN ON test p ort UUCSSpp l r 3
1281(f) Local Digital
Looparound Test
(#58)
WARNING ON test p ort UUCSSpp l r 3
1537(g) 40968 None WARNING OFF
1793 TDM NPE Crosstalk
Test (#6 MIN/WRN2
2. Major or minor alarms may be downgraded to Warning alarms based on the value used in the set
options command.
ON test p ort UUCSSpp l r 3
2049(h) 32770 None
2049(i) 40967 None