DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126 Issue 4
June 1999
Maintenance Object Repair Procedures

9-275ATM-TRK (Circuit Emulation Service Circuit Pack)

9
Aux Data XX
XXYY FAIL On-board error XX (Table 9-125) and/or off-board error YY (Table 9-126).
1. Examine the error logs and repair any errors found.
PASS The ATM circuit pack has passed this test. No service effecting
errors/alarms have been detected on board.
0NO
BOARD ATM-TRK circuit pack not found
1. Check the error log, and correct Error 125 (wrong board) or Error 131
(no board), if found.
2. Make sure that the board is properly translated and inserted.
3. Check for hyperactivity (Error 1538). Run reset board UUCSS if
hyperactive.
4. Run the test again. If it fails, replace the board, and retest.
Table 9-125. Aux Data XX for ATM Board Error Query Test (#1259)
If XX= Then
1 ATM framer chip failed
2 NCE chip failed
3 LANHO critical error
4 TDM Programmable Logic Device Failed
5 All on-board DSPs failed
6 Receive Network Processor failed
7 Transmit Network Processor failed
8 Memory read failed
9 Dual UART chip failed
10 LANHO receive parity error
11 LANHO FIFO over flow error
Continued on next page
Table 9-124. ATM Board Error Query Test (#1259) — Continued
Error
Code Test
Result Description/ Recommendation
Continued on next page